1

Mould Bent Glass Tempering Furnace For Backlite

Time:2017-11-06 14:37:47Hits:393
Mould Bent Glass Tempering Machine is a special plant used to produce the bent tempered glass with multi curvature, which mainly used in the fields of rear doors and side doors of automotives (the side door also is multi curvature), trucks, furniture, etc
Related introduction


Model

Max. Glass Size

Min.Glass Size

Thickness

Max.Depth

(mm)

(mm)

(mm)

(mm)

LV-TB1608V

1600 x 800

200 x 300

3.56

150

LV-TB1810V

1800 x 1000

200 x 300

46

150

LV-TB2012V

2000 x 1200

200 x 300

56

150

LV-TB2212V

2200 X1200

200 x 300

56

300


1. Machine Application:

Mould Bent Glass Tempering Machine is a special plant used to produce the bent tempered glass with multi curvature, which mainly used in the fields of rear doors and side doors of automotives (the side door also is multi curvature), trucks, furniture, etc. Our customer produced the side doors for BMW, Audi, Toyota, Honda, Hyundai, Peugeot, etc.

2.Main Technical Features:

Loading Table:

1. Equipped with LED light to detect the glass with defects.

Heating Section:

1. Sectional driving for ceramic roller, the driving speed of last zone is faster than other zones.

2. Sectional heating, individual heating zones for each working position.

There are ceramic plates to divide the different heating zones,

3. There are ceramic plates at the top of oven, which could ensure more even heating, avoid dregs falling. But the cost is higher and has higher requirements on the installation.

4 The ceramic rollers system is driven by triple belts, which can ensure better simultaneous and stable running, and avoid the scratch and destroy of glass when above the rollers. It would not affect the running when any one of belt damaged. The design as below picture:



5 Same top quality insulating materials for whole heating oven

6. Heating elements use the gapless design (parallelogram shape), which could make the heating more even. This could improve the finished product rate and better product quality. The design as below picture:


7. Using ceramic support for heating elements, which could avoid earth to avoid heater trouble

Quenching Section:

1.Trumpet type air nozzle, which makes stronger air pressure, better quality, lower energy consumption, as below picture:

2. Round type air ducts, stronger air pressure, less air loss, lower energy consumption

3. Modular quenching design, makes adjustment more precision, mould-change more easy, and changing time shorter.

4. Cooling fans for further cooling

Control System:

1. PLC, inverters. Contactors: Siemens

2. Network data for servo motor control mode: Profinet, compared with traditional wiring-connection, this mode could reduce disturbance


Pictures For Reference:


  • Previous: There is no
  • Next: There is no

CONTACT US

Add:No.99, Jinguyuan Road, Luoyang, China

Tel:0086-379-64723096  0086-15136360852  

Fax:0086-379-64723096

E-mail:info@leverindustry.com

PC:471000

Copyright:Copyright © 2017 LUOYANG LEVER INDUSTRY CO., LTD.

MESSAGES